Field Guidance

Learn what happens after you pass the test

Field Guidance turns inspection concepts into repeatable jobsite steps. Each guide explains what the inspector is looking at, why it matters, what controls the work, what to measure, common problems, and what to document.

Welding inspection

Pre-weld inspection, WPS verification, welder qualification, fit-up, preheat, interpass temperature, visual examination, weld discontinuities, repair welding, and arc strikes.

Structural inspection

Bolt receiving, snug-tight and pretensioned joints, turn-of-nut, DTI inspection, slip-critical joints, column splices, baseplates, shims, alignment, and erection tolerances.

Piping inspection

Material receiving, pipe fit-up, internal alignment, root opening, flange alignment, gaskets, bolting and torque, hydrotesting, NDE coordination, and punch lists.

Civil and grout inspection

Baseplate preparation, anchor rods, forms, surface condition, mixing, water control, sample collection, early-age checks, and final acceptance.

A consistent inspection method

Every full guide follows the same practical structure: what it is, why it matters, governing documents, inspection steps, acceptance criteria, measurements, common problems, documentation, and a realistic field example.

Member access begins with the current CWI and welding library. Additional field disciplines are released as the platform grows.